-
2020/10/23The PCD Cutter Inserts Application In High-end Matrix Bit
LINKUT Superior PDC insert cutters with high wear ratio and impact resistance, which are successful used for high-end matrix bit.
-
2020/10/09Long Tool Life PCD (polycrystalline Diamond ) Nozzle
Polycrystalline diamond, as the most hard and wear resistant material in the world, is undoubtedly the best material for nozzle core. The nozzle made of LINKUT EDM cuttable (conductive silicon bond) large-size polycry...
-
2020/09/21How to Improve Machining Efficiency and Prolong PCBN Cutting Tool Life
LINKUT is committed to providing PCBN cutting tools with various structures to meet the needs of various machining environments.
-
2020/09/03The Wide Application Range of Polycrystalline Diamond Compact (PDC) Cutter
Polycrystalline diamond Compact (PDC) cutter is a new type of functional material. It is sintered with diamond powder and cemented carbide substrate under ultra-high pressure and high temperature. It has the high hard...
-
2020/08/25The Requirements of PCBN Superhard Cutting Tools for Dry Cutting
-
2020/08/11The Failure Modes of Indexable PCD Diamond Tools
Diamond, is the hardest substance in nature. Similar to other indexable pcd diamond tools, the cutting insret will wear out after a long period of use. The main failure modes are crater wear and built-up edge.
... -
2020/07/31How to Choose the fit Indexable CBN Inserts For Brake Disc Machining?
The material of the brake disc is generally HT250 (grey cast iron), which is one of the important parts in the disc brake device. The indexable cbn insert (PCBN tool) has strong impact resistance, good wear resistance...
-
2020/07/23The Influence of Drawing Process and Die on Mechanical Properties of Steel Wire
During the drawing process, the steel wire is heated due to deformation heat and frictional heat, especially during continuous drawing.
-
2020/07/09LINKUT-Professional Solution Provider For Roll Machining and Repairing
Common materials of Rolls are: chilled cast iron, alloy cast iron, high speed steel, forged steel, powder metallurgy, etc., which are large parts, usually with higher hardness and larger cutting allowance. LINKUT has ...
-
2020/06/25CBN PCD Tools for Cutting Cemented Carbide Precision Parts
At present, CBN and diamond tools are the most suitable materials for turning and milling carbide, because the hardness of the tool itself must be higher than the hardness of the workpiece being processed.
-
2020/06/11The Failure Mode of Polycrystalline Diamond Compact Cutters-Smooth Wear
The micro chip breaking, macro cracking and peeling failure of polycrystalline diamond compact (PDC) bit cutters cutting teeth are the main forms and causes of early failure of PDC bit. To prevent early failure of PDC...
-
2020/05/23Turning and Milling of Universal Joints of Automobile
The professional turning and milling solutions could be provided for your universal joints machining of the Automobile.
More Information Require? Feel free to contact with us!
