-
2021/04/15What is the difference in the life of Diamond Coated Tools？
Like any other cutting tool, the life of diamond coated tool is different, which mainly depends on the material to be cut, the feed rate and cutting speed selected, and the geometry of the workpiece.
-
2021/03/19Why CBN Cutting Tools is fit for Brake Disc Turning?
It is a very important problem to choose the right cbn cutting tool to improve the processing quality and efficiency when turning the brake disc.
-
2021/02/25How to judge the CBN PCD Cutting Tools Wear?
CBN PCD cutting tool wear is one of the most basic problems in machining. The knowledge of tool wear can help customers extend the life of CNC tools, find problems in advance, and reduce machining abnormalities.
-
2021/01/29Turning Characteristics of Chilled Cast Iron Roll
In view of the difficult turning characteristics of chilled cast iron roll, the cutting tool to be selected must have a series of advantages such as high hardness, high heat resistance, high wear resistance and impact...
-
2021/01/05Why CNC Diamond Tool is suitable for high gloss cutting?
The principle of high gloss cutting: the CNC diamond tool is sharp, the hardness of the cutter is high, the machined surface is smooth and flat, and the chip removal is easy. There is no chip accumulation at the cutti...
-
2020/12/18The Obvious Advantages of LINKUT PCD Cutters
LINKUT PCD cutters with long tool life, is about 20-100 times of other cutting tools.
-
2020/12/02PCD Shaving Dies for Shaving Application
-
2020/11/16LINKUT Double Sided PCBN (Polycrystalline Cubic Boron Nitride) Tools
LINKUT Double Sided PCBN (Polycrystalline Cubic Boron Nitride) tools with a positioning center hole, which is competent for the worse working conditions, which has good cutting performance and is suitable for 0 ~ 5mm ...
-
2020/10/29PCD Diamond Milling Cutter For Copper Aluminum Alloy Machining
Compared with the straight edge PCD Diamond Milling Cutters, Sprial edge Diamond Milling Tools with better application effection due to its smaller cutting resistance.
-
2020/10/15The PCBN PCD Tools Requirements for Automatic Chip Wrapping
For solving the automatic chip wraping problem, there have the high requirements for the PCBN PCD cutting tools and the superhard tools with chip breaker is necessary.
-
2020/09/27The Successful Application of CVD Diamond in Multi Point Dresser
-
2020/09/11PCD Cutting Tools for Wood Processing
PCD blanks is made by sintering natural or synthetic diamond powder and bonding agent (including cobalt, nickel and other metals) in a certain proportion under high temperature (1000～2000℃) and high pressure (50,000～...
More Information Require? Feel free to contact with us!
