-
2020/05/15Performance Test Method of PDC and Diamond Cutters
In order to ensure the quality and stability of the PDC and diamond cutters, in addition to strictly implementing the quality inspection of raw materials and controlling the production process, PDC manufacturers must ...
-
2020/05/09CBN Inserts Efficiently Turning Slewing Bearings
When turning the slewing bearing, the cutting speed is higher than the ceramic insert, the tool life of cbn inserts is 7 times of the ceramic inserts, and the roughness is guaranteed.
-
2020/05/01Influence of PDC Diamond Compact and Its Parameters on Product Properties
-
2020/04/21Pursuit of high hardness or high brittleness of Cubic Boron Nitride Insert?
CBN cubic boron nitride insert is a fragile super hard tool material. Its high hardness is its most obvious characteristic, and toughness is its most basic guarantee, but we could not lose its super wear resistance du...
-
2020/04/14The Knowledge for Oxidized surface repair of Wire Drawing Die Tools
The die repair technology undoubtedly strengthens the life of the wire drawing die, and has good economic benefits. It can apply various iron-based alloys and other metal material die and workpieces to strengthen and ...
-
2020/04/10What We Know for MCD and CVD DiamondTools?
The monocrystal diamond tool is currently the main cutting tool in the field of ultra precision machining. The cutting tool generally has a mass greater than 0.1g and a minimum diameter length of not less than 2mm. It...
-
2020/04/02How to Choose the optimal cutting paramters of PCBN inserts for turning Brake Disc?
When roughing or finishing brake disc, the cutting parameters of CBN inserts will directly affect the cutting tool life.
-
2020/03/27PDC Bit Cutters Drilling Application
The advantages of PDC drill bit cutters are mainly focused on the simple structure and high wear resistance of the drill.
-
2020/03/21What are the methods to improve the quality of the drawing die?
The wire drawing die is usually operated under high temperature and high pressure. Under the influence of pressure and temperature, the wire drawing die blanks appears to be elastically deformed.
-
2020/03/06CBN Insert Interrupted Turning Hardened Steel
Hard turning refers to the process method of turning hardened steel as the final machining or finishing.
-
2020/02/24PCD Tools for efficient Turning of Ceramic Materials
Ceramic materials have high hardness, high brittleness, and low thermal conductivity, making them a difficult to process material. LINKUT PCD tools can meet your machining requirements for high precision, high surface...
-
2020/02/03The Coating Introduction for the CBN PCD Cutting Tools
The coating on super hard material tools (cbn or pcd cutting tools) is a material with a lower hardness than the substrate. The purpose is to improve the fracture toughness of the tool surface (which can be increased ...
More Information Require? Feel free to contact with us!
