-
2019/11/13What are the characteristics of the wire drawing process?
Drawing is a plastic working method in which an external force acts on the front end of the drawn metal to pull the metal blank from the die hole smaller than the cross section of the blank to obtain a product of a co...
-
2019/11/04Machining Characteristics of Wear-resistant Low-alloy Cast Iron Parts and Chilled Iron Parts
LINKUT solid cbn inserts have very successful application for the wear resistant cast iron and chilled iron parts.
-
2019/11/04PCD Cutting Tools for the Graphite Machining
Tool material is the fundamental factor determining the cutting performance of the tool, and has a great impact on machining efficiency, machining quality, machining cost and tool durability. In general, the harder th...
-
2019/11/04How to Choose the fit Turning Tools for the Hardened Steel Materials?
The coated alloy inserts, ceramic inserts, cbn turning tools all of them could be used for machining hardened steel materials, which type is the fittest?
-
2019/10/23The Important Role of PDC Cutter Inserts for Drilling
In order to explore and exploit oil and natural gas deep in the strata, people must use a variety of drilling equipment and tools to drill through hard and complex formations. Among the drill tools, the PDC cutter ins...
-
2019/10/21PCBN Tools Inserts for Thermal Spray Welding Material Machining
Why PCBN tools insert is fit for the thermal spray welding materials machining? Which is mainly due to the characteristics of this materials.
-
2019/10/14Introduction of The Service Life of Shaped Wire Drawing Die
LINKUT could supply the finished shaped wire drawing die products and aslo could supply the PCD wire drawing die blanks for the shaped die.
-
2019/10/11CBN Inserts for High Efficiency Turning Brake Drum
For the brake drum turning, the CBN inserts processing efficiency is 5 times higher than the carbide tools, and the durability is higher.
-
2019/10/09The Structure and Function of the Diamond Wire Drawing Die Core
Diamond wire drawing dies are a very important consumable product for various metal wire manufacturers to draw wire.
-
2019/10/07PCBN Inserts for Cylinder Liner Machining
Compared with coated carbide tools, the PCBN inserts for cylinder liner machining at cutting speed of 800m/min, the tool life improved 3 times, the cutting efficiency improved 1 time.
-
2019/09/30Effect of Drawing Conditions on the Service Life of Wire Drawing Die Tools
The service life of wire drawing die tools, on the one hand, it depends on wire drawing die tools’ own quality, on the other hand, it depends on the drawing conditions.
-
2019/09/28SNGN CBN Inserts for Brake Disc Machining
More Information Require? Feel free to contact with us!
