-
2019/11/04Common failure mode for PCD Tools
-
2019/11/04The Unsteady Factors of CBN Inserts for High Manganese Steel Machining
-
2019/11/04CBN Inserts are Suitable for High Hardness Parts Turning
CBN inserts are more suitable for turning high hardness parts. In fact, the hardness of the parts being machined is generally above HRC46. If the machining hardness of pcbn inserts is lower than HRC46, it will be a li...
-
2019/11/04Why is it important for the regular maintenance of Diamond Wire Drawing Dies?
During long term use of the wire drawing die, the die wall is strongly rubbed and washed by the metal wire, which inevitably causes wear. In order to extend the service life of the wire drawing die, it is necessary to...
-
2019/11/03LINKUT Revolutionary PCD Nozzle is Launched
LINKUT manufactures revolutionary PCD wear parts and supply the professional service for all of your wear parts requirements, greatly improve the performance and productivity of your products. Compared with the Tungst...
-
2019/10/25The Factors for affecting Diamond Wire Die Drawing
-
2019/10/18Why the reasonable selection of the wire drawing material is the key to ensure successful applicatio
The drawing die of different materials has its applicable processing range, and the wear form of the wire drawing die of different materials when the same wire is processed. There is a big difference between the servi...
-
2019/10/16PCBN Cutting Tools for Machining Synchronizers
PCBN cutting tools is the best tools for machining synchronizers at present and their tool life and cutting efficiency are greatly improved.
-
2019/09/19Solid CBN Inserts for the Volute Liner of Slurry Pump Machining
The super hard cutting tools solid CBN inserts hard turning slurry pump cover, impeller, volute outer circle, inner bore and end face have obvious advantages.
-
2019/09/19The Features and Advantages of LINKUT PDC Cutters
Why choose LINKUT PDC cutters for oil, geological, well exploration, and other areas of drilling?
-
2019/12/08The Principles of CBN Tools for Dry Turning Hardened Steel
Select a large depth of cut as far as possible under the rigidity of the machine tool, so that the heat generated in the cutting zone softens the metal in the front of the edge and can effectively reduce the wear of P...
-
2019/12/05Reasons of CBN Inserts for difficult processing of powder metallurgy parts
Powder metallurgy parts require only a small amount of processing, but machining powder metallurgy parts is extremely difficult, especially for the cbn inserts, mainly due to the porous structure of the powder metallu...
More Information Require? Feel free to contact with us!
