-
2019/12/05Reasons of CBN Inserts for difficult processing of powder metallurgy parts
Powder metallurgy parts require only a small amount of processing, but machining powder metallurgy parts is extremely difficult, especially for the cbn inserts, mainly due to the porous structure of the powder metallu...
-
2019/08/28Analysis of Wear Causes of PCD Drawing Die
1)The quality of the drawing die itself causes the die to wear out 2) Improper use of the wire drawing process leads to die wear
-
2019/08/19Reasonable Choice of PCBN Cutting Tool Inserts Parameters
In the process of metal cutting, the correct selection of PCBN Cutting Tool Inserts parameters, tool geometry and other processing conditions can give full play to the high-efficiency and long-life characteristics of ...
-
2019/08/30The Different Edge Conditions of the PCBN Inserts
Edge processing is a key factor in determining the performance of PCBN inserts. In order to avoid edge crack and broken due to large loads when cutting high-strength materials, ideal machining quality, surface roughne...
-
2019/08/27The selection and cutting parameters of the PCD Inserts
The main considerations for PCD insert selection are surface accuracy, shape accuracy, dimensional accuracy, tool deformation, reduced duty cycle, reduced downtime, increased tool life, hard materials, tool costs, red...
-
2019/08/21PCBN inserts increase production of interrupted turning hardened transmission parts
CBN materials enhance the resistance to crater wear and fracture resistance when machining carburized and quenched materials at high speed. Our tipped pcbn inserts grade such as BNT4, BNT6, BNT8 with different edge ch...
-
2019/09/18The Application of the CBN Cutting Tools
The application of the CBN Cutting Tools is mainly reflected in: High speed cutting, heavy-duty cutting and dry cutting.
-
2019/09/17When need to replace the CBN Cutting Inserts?
In the follow case of damage to the CBN Cutting Inserts, it needs to be replaced,which generally occurs in interrupted cutting conditions. There are other situations, such as the size of the workpiece after processing...
-
2019/09/16The Advantages of PCD Tools
-
2019/09/15Machinability of Aluminum and Alloys with PCD Tools
The processing of high-precision, low-roughness surfaces of aluminum and alloys is achieved by high-speed machining using PCD tools or PCD insert.
-
2019/09/14PCBN Inserts for CVT Transmission Spare Parts Machining
LINKUT BNT4 coated tipped PCBN insert for the driven wheel shaft of the CVT transmission machining, compared with other famous foreign CBN grade, the tool life increase at least 10%.
-
2019/09/13PCBN Cutting Tools for the Marine Cylinder Liner Machining
At present, the marine cylinder liner industry uses alloy inserts to process large-size cylinder liners. 1 edge of the alloy cutting tools cannot complete one surface, and the replacement of new tool tips forms joint ...
More Information Require? Feel free to contact with us!
