PDC cutter drilling tools is suitable for coal mine, geology, engineering.

The cutting teeth on the working surface of the pdc cutter bit are the most valuable part of the drill bit. The cutting teeth are made of polycrystalline composite diamond sintered at 

high temperature. Its characteristics are relatively hard and brittle.

Diamond composite drill bit is regarded as one of the relatively expensive wearing parts in underground engineering. Therefore, we should be careful from its packaging, transportation, 

and use to prevent accidental damage.

PDC drill bits are suitable for drilling soft and medium-hard rock formations. Different rock formations should use different drill bits, otherwise the cutting teeth will be easily worn and the

mechanical drilling speed will be reduced.

LINKUT, as the professional manufacturer for PDC drill tool, suggest you:

According to different situations, using different drills and different operating methods;

Diamond composite drill bit carefully check all parts before going down to ensure that there is no problem with the drill bit;

Run for half an hour at low speed for the first time, and gradually use normally;

Use in harsh geological environments to reduce axial pressure and speed to prevent drill bit fracture.